This is a factory accessory, so fitting it does not affect your hood's lifetime warranty.
Learn more →
Ductless Recirculating Kit – Range Hoods & Inserts
Ventilate a kitchen with no exterior wall, no roof penetration, and no run of duct. The kit adds two activated-carbon filters behind the hood's baffles, then returns filtered air to the room through the top of the canopy.
This product will be shipping by October 31st.
Ventilationwithout the duct.
Interior islands, condos, historic walls, retrofits where the joists run the wrong way — the recirculating kit puts a real DC hood where a duct can't go.
Capture, filter, return.
In a ducted install the blower pushes air outside. In a recirculating install it pushes that same air through activated carbon first, then back into the room through the vents at the top of the canopy — grease and odor left behind in the filters.
Drawn in — the brushless DC blower pulls cooking fumes, steam, and grease off the cooktop.
Filtered twice — 304 baffles take out the grease; activated carbon takes out the smoke and odor.
Returned clean — filtered air exits the top of the canopy back into the kitchen, with no heat loss outside.
Grease in the baffles. Odor in the carbon.
Your hood's stainless baffles stay exactly where they are — they still do the heavy lifting on grease, and they still go in the dishwasher. The kit's carbon cartridges sit behind them and handle what a duct would otherwise carry away.
High-density activated charcoal — adsorbs smoke, frying odor, and VOCs rather than masking them.
Tool-free cartridges — quarter-turn mounts behind the baffles; swap both in under a minute.
No loss of quiet — sized to the DC blower's curve so the hood keeps its low-speed whisper.
Keeps the conditioned air inside — nothing heated or cooled gets thrown outdoors.
Everything but the duct.
No trips to the hardware store, no fabricated transitions, no roof cap.
2 × activated carbon cartridges — sized to your hood width, quarter-turn mount.
Recirculating deflector plate — caps the blower outlet and redirects flow to the canopy vents.
Filter retention brackets — stainless, finished to match the hood interior.
Fastener pack — all screws and grommets required, no drilling.
Illustrated instructions — model-specific, with a filter-replacement schedule.
Put a real hood where a duct can't go.
Interior islands, condos, historic walls, retrofits where the joists run the wrong way — the same DC-quiet capture, filtered and returned to the room.
A lifetime warranty
on every product we make.
We build to a fit-and-finish standard the appliance industry doesn't — no expense spared. So we back every product we make for as long as you own it, and fitting a factory accessory like this kit does not affect that cover.
Read the warranty →Every detail, on the record.
Filtration, fit, and maintenance for both kit variants.
Designed to belong together.
Every Induction Hardware product is all-electric and built to the same standard. Pair the kit with the hood it was made for.
Hear it before it's over your cooktop.
Visit our Reno showroom, or find an Induction Hardware showroom near you. Run a hood ducted and recirculating back to back, and see how the carbon cartridges mount.
Induction Hardware Showroom12920 Old Virginia Road, Suite 160
Reno, Nevada 89521
Shop every category
Eight families of professional induction appliances — engineered on one platform, finished to match across the kitchen.
Induction Grill
Pro Range Hoods
Induction Ranges
Induction Cooktops
Wall Ovens
Dishwashers
Refrigeration
Microwaves